Nitronic 60 is an anti-galling and wear resistant austenitic stainless steel. It provides a significantly lower cost alternative to combat wear and galling when compared with cobalt-bearing and high nickel alloys. The uniform corrosion resistance of Nitronic 60 is superior to 304 in most media. Chloride pitting resistance is superior to 316. Room temperature Nitronic 60 also possesses excellent high temperature oxidation resistance and low temperature impact resistance.
Due to its grain structure, the galling resistance of Nitronic 60 is superior to that of any other stainless steel. It resists wear, tearing or freeze up of both the primary and contact materials over a wide range of service temperatures. The elevated temperature wear resistance of Nitronic 60 is excellent despite its relatively low hardness when compared with cobalt and nickel-base wear alloys. It also performs well in metal-to-metal wear in nominally inert atmospheres. The cavitation erosion resistance of Nitronic 60 is superior to the austenitic stainless steels as well as high strength duplex (ferritic-austenitic) stainless steels.
The general corrosion resistance of Nitronic 60 falls between 304 and 316. However, in a wear system, a galling or seizure failure occurs first followed by dimensional loss due to wear and finally corrosion. Although the general corrosion resistance of Nitronic 60 is not as good as 316, it does offer better chloride pitting, stress corrosion cracking and crevice corrosion resistance.
In high temperature service, Nitronic 60 exhibits carburization superior to 316L and 309. Its oxidation resistance is far superior to 304 and 316 and comparable to 309.
- Infrastructure bridge pin and hanger expansion joints, parking deck expansion joint wear plates.
- Hydroelectric Power – stems, wicket gate wear rings
- Oil and Gas Production – pump wear rings, bushings, valve trim, seals, fittings, logging equipment and screens.
- Food processing and Pharmaceuticals – galling resistant applications in sanitary equipment where lubricants can not be used
- Chemical and Petrochemical – process valve stems, seats and trim, pump wear rings.
Information provided by Carlson
Precision Alloy Services is a specialty metals distributor and processor located in Bowling Green, Ohio. Precision Alloy Services quality management system is certified to ISO 9001:2015 and AS9100 Rev D, and we carry a large inventory of materials including nickel, cobalt, aluminum and titanium alloys, stainless steels and specialty alloy steels in a variety of sizes of sheet, plate, bar, and wire. Processing includes bar sawing, water-jet cutting, chamfering and other services. Contact Us for more information.
Nitronic 60, N60 | 420 Stainless, 420(B), AMS 5621, ASTM F899 | 420 MOD (X15TN), ASTM F899 | 440A Stainless, AMS 5631, ASTM F899 | 440C Stainless, AMS 5630, ASTM F899